Specifications:
Quadcopter Frame: Full carbon fiber 250 quadcopter frame (AFR)
Motor: HobbyWing 1806
ESC: HobbyWing 12A Simonk (5V BEC)
Battery: Lion power 1500mAh
Image Transmission: 5.8G 600mw
Propeller: 5030 carbon fiber propeller
Flight Controller: CC3D
Camera: 700 Line HD NTSC
Package Dimensions: 29 × 17 × 5cm
Note: This product does not suitable for children under 14 years old and new hand.
Package Includes:
1 × 250 Quadcopter Frame Kit
4 × Motor
4 × ESC
1 × Image Transmission
1 × Battery
4 × 5030 Propeller
1 × CC3D
1 × Distributor Plate
1 × Camera
2 × XT60 Plug (BNC)
1 × Shrinkable Tube
15 × Banana Plug (BNC)
1 × Velcro Cable Tie
10 × Nylon Cable Ties
"Click Here!!! to get the best picture, get the best deal, lowest price and more detailed differences and similarities of the product as well as some more important information affecting your purchasing decision."Click Here
Session expired
Please log in again. The login page will open in a new tab. After logging in you can close it and return to this page.
We couldn’t resist indoor testing when the weather was bad. The batteries charged up and powered each craft … As part of a STEM project, some of my students (high school seniors) were divided into two groups, each group buildinga YKS 250 FPV quadcopter. The YKS kits were purchased from the Elect&Small2 Amazon store, together with aspare frame kit just in case. Prior to the project’s start, I had built one of the same kits obtained at a higher price from another seller.All the purchased YKS kits were complete, and everything worked.The frame went together with…
You can pick those up at a local hobby store or order a set on line (something like these: http The product arrived with all components except a few screw posts to hold the flight controller in place. You can pick those up at a local hobby store or order a set on line (something like these: http://www.amazon.com/Nickys-Gift-Quadcpter-Hardware-Screws/dp/B019PUK1M2/ref=sr_1_8?s=toys-and-games&ie=UTF8&qid=1452268137&sr=1-8&keywords=screw+posts+for+quadcopter).One motor failed a day in that we had to replace. The frame was easy to assemble with the instructions included, but there…
This is a nearly-complete kit to build a 250-class racing quadcopter (a “ZMR 250” clone, according to what I could find on-line). As expected, it doesn’t include a receiver (or transmitter): If you already have a transmitter, you’ll presumably pick a received that matches; if not, you’ll have to buy both (I recommend FrSky’s system, but there are many other options — FlySky is a popular budget-friendly solution). Also as expected, this does not include video reception hardware,…